s深爱激情网

高新手艺企业 · 汽车深度养护品专业供给商

天下招商德律风:

以后地位:s深爱激情网 > 产物中间 > 固诺-K33快蜡固诺
K33快蜡

接纳最早进的汽车去划痕手艺,能够敏捷磨除1500#-2000#砂纸痕,抛光蜡尘少少,同时具备增艳功效。

  • K33快蜡

品牌:固诺

体系:全车防锈

K33快蜡

产物编号:KL.02.Z077

企业规范:Q/YK 024-2009

仅供4S店利用


产物特色:

接纳最早进的汽车去划痕手艺,能够敏捷磨除1500#-2000#砂纸痕,抛光蜡尘少少,同时具备增艳功效。


产物功效:

1、疾速修复漆膜因操纵失误引发的缺失。

2、撤除经1500#-2000#砂纸的打磨陈迹。

3、撤除尘粒,流挂,适量喷漆及橙皮纹等。

4、能够修复陈腐漆磨氧化外表,答复漆膜高度光芒。


利用方式:

1、为防止漆面过于枯燥, 倡议在漆面实现喷涂后24小时内停止湿磨平坦.

2、按个体环境而挑选研磨砂纸的粗细级别(本产物可去除#1000以上的湿磨砂纸划痕*)

3、如需疾速有用地去除砂纸痕, 倡议接纳中到中粗羊毛球(注: 若接纳粗/中粗海绵垫亦可, 但去痕速率会有差别.)

4、在羊毛球/海绵球上, 倒上大约2寸直径圆形规模的蜡. (注重: 在起头打磨的羊毛球/海绵球会较为枯燥, 但当打磨一段时候后, 会有必然分量的粗蜡囤积在羊毛球/海绵垫的外表, 当外表储蓄积累必然的粗蜡后, 用量会削减.)

5、用专业高速抛光机停止研磨, 速率应设在约1800转/分钟, 标的目的应由左上方起头, 到右上方, 打磨面积在一起头设定在2’x2’的规模. 从左到右, 而后向下挪动约5’’, 再从左到右. 牢记羊毛球/海绵垫须平贴在漆面上, 不然 很是轻易在漆面上留有螺旋纹.

6、打磨2’x2’’面积2-3次, 若粗蜡起头枯燥, 可喷水雾再活化粗蜡停止二次研磨.

7、持续研磨至粗蜡耗尽, 而后用柔嫩的纳米/微纤维布抹擦漆面.


Properties:

With the most advanced automobile denotching technology, it can quickly remove 1500-2000 # sandpaper marks, and the polishing wax dust is very little.


Product functions:

1. Quick repair of the missing paint film caused by operation error.

2. Remove the polishing marks of 1500-2000 # sandpaper.

3. Remove dust particles, flow hanging, excessive paint spraying and orange peel lines, etc.

4. It can repair the surface of the old paint and restore the high gloss of the paint film.


Usage:

1. In order to avoid excessive dryness of the paint surface, it is recommended to conduct wet grinding and leveling within 24 hours after the painting is finished.

2. Select the thickness of abrasive paper according to individual cases (this product can remove more than #1000 wet abrasive paper scratches *)

3. If sandpaper marks need to be removed quickly and effectively, it is recommended to use medium-thick wool balls (note: if thick/medium-thick sponge pads are adopted, the mark removal speed will be different).

4, on the wool/sponge ball, pour over about 2 inches in diameter circular range of wax. (note: at the beginning of the grinding ball of wool/sponge ball is relatively dry, but when polishing after a period of time, there will be a certain amount of coarse hoard wax on the surface of wool ball/rubber cushion, after the surface accumulated certain coarse wax, consumption will be reduced.)

5, with professional high-speed grinding polishing machine, speed should be located in about 1800 r/min, the direction should start from the top left, to the upper right, polishing area in the first set in the range of 2 "x2". From left to right, then move down about 5 ", then from left to right. Remember that wool ball/cushions should be flat on the paint surface, otherwise very easy with spiral lines on the surface of the paint.

6. Polish the area of 2 'x2' 2-3 times. If the crude wax starts to dry, spray water mist and reactivate the crude wax for secondary grinding.

7. Continue grinding until the crude wax is exhausted, then apply a soft nano/micro fiber cloth to the finish.





空调洗濯剂