s深爱激情网

高新手艺企业 · 汽车深度养护品专业供给商

天下招商德律风:

以后地位:s深爱激情网 > 产物中间 > AKO 爱蔻 > 冷却体系-爱蔻策念头环保冷却油冷却体系
爱蔻策念头环保冷却油

接纳稀释性全分解油,能有用地下降温度,沸点高。 

爱蔻策念头环保冷却由美国ubrizol-AKO、美国陶氏公司供给质料质料及手艺撑持,扎根中国汽车养护用品研发一级学府--华南理工大学化工系,经心研发而成!


  • 爱蔻策念头环保冷却油

爱蔻策念头环保冷却油

品牌:AKO爱蔻

体系:冷却体系

爱蔻策念头环保冷却油

产物编号:AKO-115-4L/4L

企业规范:Q/YK 046-2011

产物仅供4S店利用

本品接纳高沸点连系高效的抗泡配方,并参考德国国度尝试室冷却剂抗腐手艺,由高等多元醇,抗氧剂,防气蚀剂等多种增添剂精制而成



产物特征:

1、沸点高 、冰点低 ;(任务温度-60℃ ~180℃), 不结冰耐酷寒 ,完全消弭 “开锅”懊恼,热车可随时翻开水箱盖。

2、无铁锈、无水垢、无侵蚀、无气蚀、无蒸发,无压力。 耽误了策念头部件的利用寿命,削减维修和改换。

3、有用的改良和均衡了策念头的温度,削减了策念头的磨损,晋升策念头机能。

4、延长策念头起动时升至一般温度的时候,下降策念头乐音,削减废气排放。

5、消弭汽缸顶部“过热极点”景象,防自燃、防爆震。 增添扭矩, 加强能源、 下降油耗 。

6、高品德产物,一次加注,耐久耐用,利用寿命跨越50万千米,真正无需改换的冷却油。利用方式:


1、施工工具:新车、磨合期后的车


2、施工操纵流程:

(1)、车辆进入工位后翻开暖风,对策念头停止惯例查抄:策念头水温、毛病灯、暖风情况、冷却体系检漏。(若有渗漏维修后再操纵)

(2)、拧开放水开关或拆开下水管,把原车冷却水放掉,拧紧放水开关或装好下水管。

(3)、等策念头降温后往水箱里加进清水,起动策念头让冷却体系停止洗濯,洗濯进程加油门让节温器翻开(不开空调时电扇动弹)

(4)、洗濯实现后拧开放水开关把水放掉,拆开上、下水管,暖风管、中缸放水螺丝、副水箱(若螺丝太紧倡议不拆),有双空调的车型,还需撤除后排暖风管。

(5)、等策念头降温后用清水洗濯全部冷却体系一遍,如水箱、缸休、暖风箱、副水箱等。

(6)、用AKO专业风枪把冷却体系的水吹干净。吹水流程:(1)吹干清水箱内的冷却水。(2)吹干净缸体内的的冷却水。(3)吹干净暖水箱内的冷却水(保障出水管无水珠则可)。

(7)往中缸加注500毫升爱蔻除水剂,用风吹出来(用杯接住),用测水仪测含水量(须测3次以上)仪器刻度达53以上,再把缸休中的除水剂吹干净。

(8)、拧紧放水开关,装上上、下水管、暖风管、中缸放水螺丝(注:留一条地位高的管不装,加注无水冷却油时让它排空气),洗濯吹干后装上副水箱。

(9)、往水箱里增添无水冷却油,增添进程用手指捏高低水管停止排空(如该车型有放空螺丝则拧开螺丝停止排空),当水箱里的冷却油加满时,起动策念头踩油门让节温器翻开(加快到2500转/分,紧密亲密寄望水温变更及管道状态)。

(10)、再往水箱及副水箱增添无水冷却油直到规范液面,拧下水箱盖途径试车,路试后翻开水箱盖测无水冷却油中的水含量,仪器刻度达53以上,并查抄无水冷却液的液面高度(不够时增添到规范液面)。

(11)、查抄各水管有没漏水,冷却体系是不是一般,在水箱盖和车尾贴上AKO策念头环保冷却油正告标记,以避免再次插手传统冷却液和水。


注重事变:

(1)、换了AKO策念头环保冷却油以后不能增添水或其余冷却液,以避免影响产物的最好机能阐扬。

(2)、行车时发明冷却液不够策念头温度偏高,这时候车上不AKO冷却油,则能够增添一些纯清水先解迫在眉睫,而后有条件时再把冷却液完全改换成AKO冷却油,规复原车机能。


Engine environmentally friendly cooling oil


Product features:

1, high boiling point ℃, and eliminate the "KaiGuo" worry; Realize the cooling system under pressure of high temperature without cooling;

2, low freezing point-60 ℃, not icy cold resistance;

3, no scale, no corrosion, no evaporation, extended the engine cooling components used in life, reduce maintenance and replacement;

4, derusting, in addition to scale, clean engine cooling system;

5, improve and balance the engine temperature, reduce the engine wear;

6, shorten the engine start to normal temperature of time, reduce the waste gas pollution;

7, improve the power, increase the torque, reduce oil consumption, reduce the pollution;

8, practice proves optimal way engine cooling oil environmental protection service life more than kilometers, still effective, and can be duplicated.



Method of use:

1, construction condition:

A, km above the vehicles, before construction must use AKO cooling system treatment of cooling system for A thorough cleaning.

B, a new car or a 30000 km on the following vehicles are not clean.


2, operation process:

(1), prepare the cooling system treatment.

(2), open water tank cover the detergent directly into water tank, starting engine clean 10 minutes, the cleaning process must let go door WenQi Open Day.

(3), cleaning after the completion of the shut down engine, twist the open water switch, the cooling water drop.

(4), Water switch on

(5) the water on the switch, and went to inclAKOe water tank, starting engine clean 3-5 minutes, cleaning process must let's day WenQi open

(6), cleaning after the completion of the open water switch to twist water, dismantle,hoses, warm wind tube (has a double air conditioning models, still to be removed in the warm wind tube)

(7), with the professional FengQiang AKO cooling system of water blow clean.


Blow water flow:


(1) the blow of filtered water cooling water.

(2) clean the cylinder of the blow cooling water.

(3) blow clean water tank warming of the cooling water (blew warm water tank, need to open the warm wind, temperature moves to switch the biggest)

(8), the water on the switch, pack up and, hoses, warm wind tube.

(9), tear open next vice water tank, cleaning loaded on vice water tank.

(10), to add the water tank no water cooling oil, add process using fingers are emptying and conduit (such as the model, the vent screw is a twist screws are emptying), when the cooling in the water tank filled with oil, starting the engine accelerator let's day WenQi open, to add cooling water tank and vice water tank oil until standard liquid surface.

(11), screw in water tank cover road test, and the road test must open the water tank cover without water cooling fluid check liquid surface height, when not added to the standard liquid surface.

(12), check the water pipes have no leak, the system is normal or not, in the water tank cover and the AKO engine cooling oil with environmental protection warning signs, lest again to join the traditional cooling fluid and water.


Note:

(1), changed the AKO engine cooling oil environmental protection after can not add water or other liquid cooling, lest affect the product's best performance.

(2), driving found cooling fluid enough engine temperature on the high side, then the car without AKO cooling oil, can add some water first the solution is having some trouble, then conditional when put cooling fluid replacement thoroughly into AKO cooling oil, restore the original car performance.

空调洗濯剂